Fittings Archives | Industrial Knowledge Zone

Inspecting and Assembling a 37° Flared Tube End

Incorrect installation and assembly of hydraulic fittings are major causes for leakage in hydraulic systems. By preventing leakage in your hydraulic systems, you can avoid unnecessary costs such as: The high price of hydraulic oil Maintenance costs Energy loss System inefficiencies Environmental concerns 37° flared fittings seal systems by employing the use of metal-to-metal contact […]

When to Use Push to Connect Hose

One of the greatest advancements in hose technology, push to connect air, water and oil hose and fittings, was developed over thirty years ago. This hose style employs the simple finger trap technology to hold a hose onto a barb without clamps or a crimp ferrule. The textile reinforcement in the hose is pinched so […]

Preparing Your Fluid Power Systems for Warmer Weather

Preparing Your Hydraulic & Pneumatic Equipment for Warm Weather

The weather is gradually getting warmer and it is vital that you ensure that the fluid power equipment you design, operate or maintain is adequately equipped to cope with changing temperatures. Though winter weather is to blame for most adverse fluid power system failures, warmer weather has a few drawbacks. By preparing your plant and systems for […]

Why You Cannot use Camlock Fittings for Steam Applications

While camlock fittings make for quick and easy connections for low-pressure fluid transfer, these types of connections are dangerous for both operators and machines when used in steam applications. As a result, camlock fittings should never be used for steam applications. Liquid dynamics and the ability to vary boiling points by increasing temperature and pressure within [...] Continue reading

5 Threats to Your Hydraulic Hoses, and What You Can Do to Protect Them

Hydraulic hoses are often the last consideration in building a machine, even though they are often the factor most likely to blame when machines fail. The list below details some of the most common dangers to hydraulic hoses, and the products that are available to help protect them. 1. Abrasion Abrasion occurs when the outer cover of […]